Ask away

Yes, unconditionally. Established in 2001, Rajguru Sales Corporation is an authorized direct industrial distributor for leading multinational manufacturers including Sika, Fosroc, Supreme Bituchem, and professional tooling brands. Every drum, bucket, roll, and carton leaves our Jodhpur depot with original factory tamper-evident seals and batch inspection markings. We never engage in secondary re-packaging or grey-market stock blending.

• Authorized industrial distributor agreement active since 2001
• Direct factory pallet dispatches with untampered batch security seals
• Batch tracking numbers cross-verifiable with OEM production logs

StandardISO 9001:2015 · OEM Tamper Seal

Yes. Every single commercial delivery includes stamped manufacturer Certificates of Analysis (COA) specifying exact solids content, specific gravity, shelf-life expiry, and viscosity corresponding precisely to the batch number printed on the containers. This guarantees full acceptance during third-party inspection audits conducted by agencies such as RITES, EIL, CPWD, and NHAI.

• Physical stamped COA delivered with transport bilty / invoice
• Digital high-res PDF COA sent via WhatsApp or email prior to site arrival
• Comprehensive technical dossiers available for tender client submittals

StandardRITES · CPWD · EIL Audited

Our centralized 50,000+ sq.ft logistics facility is located Near HPCL Petrol Pump, Salawas Road, Jhalamand, Jodhpur - 342005, Rajasthan. The depot features climate-controlled covered warehouses preserving epoxy hardeners and polymer resins below 32°C, elevated heavy racking preventing moisture ingress, and dedicated forklift loading docks for rapid trailer turnaround.

• Temperature-controlled chemical holding bays for moisture-sensitive resins
• Palletized bitumen roll storage stored strictly vertically per ASTM D5147
• Direct highway access onto NH-62 and Delhi-Mumbai Industrial Corridor (DMIC)

StandardSalawas Depot · 50,000+ Sq.Ft

Yes. Formulations such as Sika Plastocrete Plus and Fosroc Conplast are 100% chloride-free integral waterproofing liquid admixtures. They chemically disperse cement grains to reduce water permeability without causing electrochemical pitting or corrosion of reinforcing steel bars or post-tensioned tendons.

• Zero risk of rebar corrosion in aggressive groundwater environments
• Standard dosage: 100ml to 200ml per 50kg bag of OPC / PPC cement
• Complies with IS 2645:2003, BS 5075 Part 1, and ASTM C494 Type A

StandardIS 2645:2003 · BS 5075 Part 1

Substrates must be sound, clean, and saturated surface dry (SSD) with zero standing water. All honeycombs, laitance, loose mortar, and formwork oils must be mechanically prepared via wire-brushing or planetary grinding. Deep cracks (>2mm) should be v-grooved and sealed with non-shrink structural repair mortar before applying Sika TopSeal 107 or equivalent slurries.

• Concrete compressive strength must be minimum 15 MPa before application
• Pre-wetting to saturated surface dry (SSD) prevents premature polymer desiccation
• Apply minimum 2 cross-directional coats to achieve 1.2mm DFT

StandardIS 16471 · ASTM C836

For exterior wall cladding or large format vitrified tiles (e.g. 1200x1800mm and above), Bureau of Indian Standards mandates IS 15477:2019 Type-4 high-polymer deformable adhesives (equivalent to EN 12004 C2TES1). For standard interior floor tiling, IS 15477 Type-2 polymer-fortified mortars provide optimal tensile adhesion exceeding 1.0 N/mm².

• IS 15477 Type-2: High bond strength for interior ceramic & vitrified flooring
• IS 15477 Type-4: High flexibility and zero vertical slip for exterior facades and stone
• Use notch trowel size 6mm or 10mm based on tile dimensions

StandardIS 15477:2019 Type-2 / Type-4

Our membranes are manufactured and tested under IS 16471:2017 and ASTM D6164 / ASTM D5147 standards. They feature non-woven spunbond polyester reinforcement (160 to 250 g/m²) delivering high tensile strength (>750 N/5cm), elongation exceeding 40%, and cold flexibility down to -2°C (APP) or -15°C (SBS).

• Torch-on application with minimum 100mm side laps and 150mm end laps
• High puncture and hydrostatic resistance for basement raft foundations
• UV-resistant mineral granule finish available for exposed terrace decks

StandardIS 16471:2017 · ASTM D6164

Construction joints (cold joints) are protected using a dual barrier strategy: hydro-expansive bentonite or hydrophilic chloroprene swelling waterbars cast into the concrete matrix, backed by swellable polyurethane injection grouting or external elastomeric joint tape systems (Hypalon tape). Pipe penetrations receive dual polyurethane sealants and torch-welded membrane collars.

• Hydrophilic waterstops expand up to 300% upon water contact
• Flexible PU joint sealants accommodate ±25% joint movement per ASTM C920
• Seam weld inspection using blunt point trowel testers on all laps

StandardASTM D5385 Hydrostatic Head

When both materials supply and installation are executed by Rajguru Sales Corporation certified applicators, we issue a formal 10-Year Corporate Performance SLA. This covers complete protection against water ingress, zero-cost remedial PU injection grouting if any seam should show signs of dampness, and scheduled annual post-monsoon preventive audits.

• Direct institutional backing with joint OEM warranty coverage
• Covers commercial basements, podiums, sunken slabs, and bridge decks
• Emergency technical response team deployed within 24 hours of call

Standard10-Year SLA · Corporate Warranty

Our contracting team utilizes single-component and two-component electric injection pumps capable of delivering up to 250 bar pressure through brass mechanical packers installed at 45° across the crack. Upon contact with active water, the hydrophilic polyurethane resin expands up to 20 times into a closed-cell flexible elastomeric foam within 30 seconds, permanently sealing deep structural cracks without excavation.

• Arrests high-head active water ingress in underground metro shafts and basements
• Non-destructive process preserving existing architectural finishes
• Flexible closed-cell foam accommodates future structural thermal expansion

Standard250-Bar High Pressure Injection

Yes, unconditionally. 100% of our B2B trade is billed with official computer-generated GST tax invoices complete with full HSN classification (e.g. HSN 3214 for sealants/waterproofing, HSN 6807 for bitumen rolls, HSN 7308 for steel grating). Automated E-way bills are generated instantly for seamless interstate highway transport, enabling EPC contractors and developers to claim complete Input Tax Credit (ITC).

• Verified corporate GSTIN with immediate GSTR-1 online filing reconciliation
• Clear segregation of base price, freight, CGST/SGST/IGST breakdown
• Direct E-way bill synchronization with vehicle registration plates

StandardGST 18% & 28% · E-Way Bill

We cater to both project-scale bulk consignments and contractor maintenance packages. In-stock products leave our Jodhpur logistics center within 4 hours of commercial confirmation. Regional delivery times are 12–24 hours across Rajasthan (Jaipur, Udaipur, Kota, Bikaner) and 24–36 hours for Delhi NCR, Gujarat (Ahmedabad, Surat), Haryana, and Punjab.

• Tile adhesives: Minimum 10 bags; Membranes: Minimum 5 rolls; Power tools: 1 unit
• Full truckload (FTL) and palletized part-load (PTL) tie-ups with verified fleet operators
• Live GPS tracking and commercial dispatch dispatch manifests sent to project managers

Standard4-Hour Depot Dispatch · NH-62